100W Power Supply Boost Module 12V24V to 72V84V Charging the Electric Vehicle Battery or High-power LED Driver Equipment
  • 100W Power Supply Boost Module 12V24V to 72V84V Charging the Electric Vehicle Battery or High-power LED Driver Equipment
  • 100W Power Supply Boost Module 12V24V to 72V84V Charging the Electric Vehicle Battery or High-power LED Driver Equipment
  • 100W Power Supply Boost Module 12V24V to 72V84V Charging the Electric Vehicle Battery or High-power LED Driver Equipment
  • 100W Power Supply Boost Module 12V24V to 72V84V Charging the Electric Vehicle Battery or High-power LED Driver Equipment
  • 100W Power Supply Boost Module 12V24V to 72V84V Charging the Electric Vehicle Battery or High-power LED Driver Equipment
  • 100W Power Supply Boost Module 12V24V to 72V84V Charging the Electric Vehicle Battery or High-power LED Driver Equipment
  • 100W Power Supply Boost Module 12V24V to 72V84V Charging the Electric Vehicle Battery or High-power LED Driver Equipment
  • 100W Power Supply Boost Module 12V24V to 72V84V Charging the Electric Vehicle Battery or High-power LED Driver Equipment

100W Power Supply Boost Module 12V24V to 72V84V Charging the Electric Vehicle Battery or High-power LED Driver Equipment

$13.19
  • Model: 500015
  • Shipping Weight: 0.22lbs
  • 995 Units in Stock
Qty Discounts Off Price
1
$13.19
2-4
$12.93
5-9
$12.53
10-29
$11.87
30-49
$11.61
50+
$11.21
 
Add to Cart:
Product Description

Module parameters:

  • Module nature: non-isolated, automatic boost, constant current and constant voltage
  • Input voltage: 10.8-35V
  • Output voltage: (1) continuously adjustable (65-97V)

        (2) Fixed output (any choice between 65-97V), please tell the shopkeeper when purchasing. (temporarily for bulk customers only)

         (3) If you need higher voltage, please contact me directly.

  •  Output constant current range: 0.5-2A (100W MAX) (continuously adjustable)
  • Output power: input 12V output maximum power 100W (input voltage is greater than 24V, output power is up to 150W)
  • Conversion efficiency: typically 92%
  • Output ripple: 20M bandwidth
  • Operating temperature: industrial grade (-40 ° C to +85 ° C) (ambient temperature exceeds 40 degrees, please reduce power usage, or enhance heat dissipation) shell surface temperature can not exceed 90 degrees
  • Full load temperature rise: 50 ° C
  • No-load current: typical 60MA
  • Load adjustment rate: ±2%
  • Voltage regulation rate: ±0.5%
  • Dynamic response speed: 5% 200uS
  • Short circuit protection: no output strict short circuit
  • Undervoltage protection: about 10.5-11V
  • Input reverse connection protection: Yes.
  • Installation method: screw fixing (diameter 3 mm), 2 fixing holes, 2 fixing holes spacing 82 mm
  • Wiring method: can be plugged and unplugged, crimped, no welding required
  • Housing: all aluminum shell
  • Dimensions: 72 (length) * 42 (width) * 23 (height) mm (excluding holes, including mounting holes 90 mm long)
  • Net weight: 100g
 
Features:
 
1. Boost structure, wide input voltage range (input is less than output)
2. Constant current and constant voltage (used to drive high-power LEDs and charge the battery)
3. The efficiency is up to 92%, the heat is small, and the energy loss is small.
4. Can be used on electric vehicles. Charge 12V or 24V low voltage batteries for 60V 64V 72V 84V batteries.
5. The boost structure will not damage the equipment after breakdown, and the safety design (to make the equipment work safely)
6. With input reverse connection and under voltage protection
7. All-aluminum shell potting design, strong resistance to earthquake, water, heat and harsh environment
8. Pluggable terminal design, easy to disassemble, easy to wire
9. Can work in parallel when power is not enough
10. Laser marking anti-counterfeiting, each product serial number is different.
 
Note: The input and output negative poles cannot be mixed or connected together.
IN+ input positive. IN- Input negative. OUT+ output positive. OUT-output negative.
Scope of application High-power LED driver, electric car 60V 64V 72V 84V battery Charging
 
Application:
 
1) Use one or two batteries to charge the battery of the electric vehicle, and charge up to 60V 72V 84V battery.
2) Solar charging voltage regulation, the solar cell fluctuation voltage can be stabilized, and the battery can be charged to avoid battery overshoot.
3) Constant current mechanism, can charge the battery and drive high-power LED
4) The system's pre-stage, ultra-high conversion efficiency design, environmental protection, low heat, and small loss of capacity.
Can be used for high-power LED drivers, charging batteries, powering equipment, etc.
 
 
Driving the LED to easily adjust the voltage and current method (for example, LED voltage 80V current 0.7A)
 
1. Module input power output is not connected to LED, adjust CV to make the output voltage reach about 80V;
2. Adjust the CC multiple turns in reverse clock until you hear a click sound inside the potentiometer (the potentiometer has been adjusted to the end);
3. Connect the LED, and connect an ammeter between the positive pole of the LED and the positive pole of the module output (the internal resistance of the ammeter is as small as possible, and the connecting wire of the ammeter is as thick and short as possible, so as not to affect the debugging result);
4. Power on, at this time the LED should be off or slightly bright, observe the current displayed by the ammeter, and slowly adjust CC clockwise until the ammeter shows about 0. 7A.
5. Remove the ammeter and directly power on the test machine.
 
Package include:
  • 1x 100W Step-up Power supply module
Reviews
There are currently no product reviews.
Write a review on this product.